Rate:

0 ratings

Log in to rate

Features

4 RANGE ATTENUATOR
2 POWER SOURCE
6500V HIGH VOLTAGE INPUT.
<6.5V LOW BATT. INDICATE
<5.5V AUTO POWER OFF
SEPARATING DESIGN, CONVENIENT, DURABLE
MEET IEC1010, UL3111, TUV GS, CAT III 6500V

Differential Voltage DC + pk AC:6500V
Bandwidth ( 50 Ω load -3dB ):100MHz( x100 50MHz)
Common Mode Voltage DC + pk AC:6500V
Common Mode Voltage RMS CAT II:6500V
Common Mode Voltage RMS CAT III:6500V
Attenuation ( Switchable ):X 100, X 200, X 500, X 1000
Input R ( Each input ):27MΩ ± 1%
Input C ( Each input ):2.5 PF ± 2%
Maximum Operation Voltage( DC + pk AC )
≦ ± 650V at X 100
≦ ± 1300V at X 200
≦ ± 3250V at X 500
≦ ± 6500V at X 1000
Common Mode Rejection Ration
( C M R R )
60 Hz : > 20,000 : 1
100 Hz : > 2,000 : 1
1 MHz : > 600 : 1
Noise ( Into 50Ω load ):≦ 1 m Vrms
Input Impedance ( between input):54 MΩ // 1.25 PF
Accuracy ( at 20 ~ 30℃ 70% RH after 20 minutes ):≦ ± 1.5 %
Maximum Output Voltage:≦ ± 6.5 V
POWER SOURCE:
1. 9V battery
2. External 6V ~ 9V DC

WARNING

1. Do not use DP-50/100 above 6500V ( DC + peak AC ) between ground and the input or 6500V ( DC + peak AC ) between the input lead.
2. Do not operate DP-50/100 in wet or damp condition.
3. Do not operate DP-50/100 in an explosive atmosphere
4. Do not immerse DP-50/100 in liquids.
5. Do not operate DP-50/100 without covers.
6. Please change the battery when the " LOW BATT" LED is lighted. At this time DP-5/100 can operate but not guaranteed the accuracy.

Pintek BP-266 HV IC Clips
MAX. Input : 3A/6500V DC+Peak AC
Insulated : Double Insulation
Safety Certifications : IEC-1010-1;UL-3111-1

Pintek BP-366 HV Banana plug to Banana plug cables
UL, 20KV Cable
Max. Current : 3A
Length: 60cm

Pintek BP-276 alligator clips 1KV
UL 1000V CAT III
Max. Current : 10A
Meet IEC-1010-1, UL-3111-1

Pintek BP-250 male BNC to male BNC cables
Wire Lenght :1.0M, male to mal
MAX. Input :3A / 500V RMS
Wire Property :5.0 mm, RG 58 A / u
Cu Wire :50Ω Coaxial BNC Cable
Insulated : Double Insulation
Safety Certifications : IEC-1010-1;UL-3111-1