Image Sensor: 1/2.8" progressive scan Exmor CMOS
Effective Pixels: Approx. 2.38 Megapixels, (1920x1080, 1280x720)
Lens: 30x optical zoom, f=4.3 mm (wide) ~ 129.0 mm (tele)
Digital Zoom: 12X
Horizontal Viewing Angle: 63.7o (wide end) ~ 2.3o (tele end)
Aperture: F1.6 ~ F4.7
Min. Illumination: 0.5 Lux, 30 IRE
Electronic Shutter: NTSC/PAL :1/1 ~ 1/10,000 sec
White Balance: ATW, USER1-5, ONE_PUSH
Day/Night: Auto(ICR), Color, B/W
S/N Ratio: >=50dB

SDI Compliance:
SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M,
SMPTE 424M level B, SMPTE 425M level B, ITU‑R BT.656 and ITU‑R BT.601

HD Video Standards:
1080p_60, 1080p_59.94, 1080p_50
1080p_30, 1080p_29.97, 1080p_25,
1080i_60, 1080i_59.94, 1080i_50, 1080i_30
720p_60, 720p_59.94, 720p_50
720p_30, 720p_29.97, 720p_25

SDI Video Sampling: 4:2:2
SDI Color Precision: 4:2:2

DOME DRIVE

Pan/Tilt Range: Horizontal: 0o~360oendless, Vertical: -90o~90o auto flip 180o
Speed: Horizontal: 0.1o~250o/s, Vertical: 0.1o~120o/s
Preset Speed: Horizontal: 300o/s, Vertical: 150o/s
Presets: 128 Points
PTZ Mode: Auto Pattern, Auto Tour, Auto scan
Speed Setup: Human-oriented focal Length, Speed adaptation
Power up Action: Auto restore to previous PTZ and lense status after power failure
Idle Motion Activate: Preset, Scan, Tour, Patrol
Protocol: Pelco-D, Pelco-P, VISCA, BENESTON

INFRARED LIGHT

Illumintaor Projector: 8 Array
Supplement Light Range: IR Distance: up to 100m

GENERAL

Power Supply: DC12V 4.0A or AC24V 3.0A
Operating Temperature: -30oC ~ 60oC, Humidity 90% or less (non-condensing)
Storage Temperature: -30oC ~ 60oC, Humidity 90% or less (non-condensing)
Casing: Aluminum Case
Weight: 8kg
Protection Level: IP66 (International Protection Marking, IEC 60529)

EMC Standard:
CE-EMC
EN55032:2015, EN55035:2017, EN61000-3-2:2019
EN61000-3-3:2013+A1:2019)