Azden PRO-XD Digital Wireless Lavalier Microphone System

by Azden
DISCONTINUED
Azden PRO-XD Digital Wireless Lavalier Microphone System
Operates in 2.4 GHz wireless range
High gain output alleviates noise and hiss produced by low-quality camera preamps
Mobile device compatible
Auto sync between transmitter and receiver
Operating range of 35 meters or more in optimal conditions
Rechargeable internal batteries
Wide frequency response and low internal noise
Headphone monitor output
Line in aux input

Specifications

PRO-XD System

Operating Freq.: 2.4GHz ISM Band
Dynamic Range: 90dB
Signal-To-Noise: 80dB
Operating Range: 35m typical; up to 120m in ideal conditions.
Freq. Response: 20Hz - 20kHz, +/- 1dB
Digital Sampling: 48kHz/16bit
System Latency: 14ms
Battery Life Span: 300 cycles
Battery Type: Lithium-ion
Power Supply: USB 5V
Accessories: shoe mount, belt clip, lapel clip, trrs adapter, USB mini to USB-A cable, AC adapter.

TRANSMITTER (PRO-XDT)

RF Output Power: 10mW
Mic Input: Φ3.5mm mono TRRS
Aux Input: Φ3.5mm stereo, line level
Input Impedance: Mic: 2.2k Ohm; Aux: 10k Ohm
Max Input: 300mV RMS
Battery Life: 11 hours
Battery Charge Time: 3 hours 30 min
Dimensions: 48x79x14mm (W/H/D)
Weight: 62g

RECEIVER (PRO-XDR)

RF Output Power: 10mW
Max Output Level: -14dBV
Mic Output: Φ3.5mm dual-mono/stereo
Headphone Output: Φ3.5mm stereo
Output Impedance: Mic: 600 Ohm; Headphone: 16 Ohm
Battery Life: 16 hours
Battery Charge Time: 3 hours
Dimensions: 48x79x14mm (W/H/D)
Weight: 68g

MICROPHONE (EX-503XD)

Mic Element: Electret Condenser
Polar Pattern: Omni-Directional
Freq. Response: 30Hz - 20kHz
Sensitivity: -46dB at 1kHz (0dB=1V/Pa)
Impedance: 2.2k Ohm (at 1kHz)
Power Requirement: Plug-in power DC 1-10V
Connector Type: Φ3.5mm TRRS
Cord Length: 105cm

In the Box

PRO-XDR Receiver
PRO-XDT Transmitter
EX-503XD Lavalier Microphone
1/8" Mini-Jack Stereo Output Cable
TRRS Audio Adapter Cable for Mobile Devices
USB Charging Unit (Cable and AC Adapter)
Shoe Mount
Lapel Clip
Belt Clip

Reviews