Lectrosonics IFBR1A UHF IFB Belt-Pack Receiver 665.600-691.100 MHz

DISCONTINUED
Lectrosonics IFBR1A UHF IFB Belt-Pack Receiver 665.600-691.100 MHz
Operating Frequency 665.600 - 691.100 MHz
Preset frequency can be set without power or transmitter signal
Scan mode stores up to five additional frequencies
Multi-color LED and rotary control for programming and operation
High sensitivity for extended operating range indoors or outdoors
Rugged machined aluminum housing
Attached battery door
8 hours battery life (alkaline)
20 hours battery life (lithium)
256 frequencies in 100 kHz increments
Microprocessor controlled
Pilot tone squelch

Specifications

Operating Frequency : 665.600 - 691.100 MHz
Frequency control : Crystal Controlled PLL
Sensitivity : uv (20 dB SINAD)
Signal/Noise ratio : 95 dB A-weighted
Squelch quieting : 90 dB
AM rejection : 50 dB, 10 uV to 100 mV
Modulation acceptance : +/-20 kHz
Spurious rejection : Greater than 70 dB
Third order intercept : 0 dBm
Frequency response : 100 Hz to 10 kHz, (+/-1db)
Pilot tone : 29.997 kHz, 2 kHz deviation (fixed crystal controlled)
Audio output : 1V RMS into 50 Ohms minimum
Antenna : Headphone cable
Min. headphone impedance : 25.6 Ohms
Programmable memory : Switches set default frequency; up to five additional frequencies can be stored in memory
Front panel controls : Single knob controls Audio Output Level, Power On, Programming and Scan Frequency Selection
Indicators :
Multi-color LED indicator for power on and battery status. Blinks to indicate channel number and
during scanning.

Battery Requirements :
9V alkaline battery lasts about 8 hours
9V lithium battery lasts about 20 hours

Power consumption : 60 mA
Dimensions : 91.4 x 61 x 20.3mm (3.6 x 2.4 x 0.8 in)
Weight : 207g (7.3 oz)

In the Box

9-Volt Alkaline Battery
Adjustment Tool
Velcro Strain Relief
Leather Pouch

Reviews