Freefly MOVI M15 3-Axis Motorized Gimbal Camera Stabilizer

by Freefly
Freefly MOVI M15 3-Axis Motorized Gimbal Camera Stabilizer
Designed for Hand-Held Use
For Cinema Cameras and DSLRs up to 15 lb
Keeps Horizon Level and Counteracts Drift
Single and Dual Operator Control Modes
Supports DSMX and SBUS RC Transmitters
Bluetooth Interface for Configuration
Software for Android and Windows
Shot Recorder Remembers Camera Position
Fully Tool-Less Balancing
Two Batteries and a Charger Included


Electrical and Mechanical
System Type : 3-axis gyro stabilized
Pan Range : 360o
Tilt Range : +/-180o
Roll Range : +/-180o
Slew Rates : 0 to 150o/sec
Interface : Bluetooth connection to Windows/Android GUI

Control Modes
Majestic Mode : Stabilized with operator control via gimbal base
Stabilized : Stabilized image with no operator input
Stabilized Slew : Stabilized with remote operator
Off : Kills drive to gimbal axes

Chemistry : Lithium-polymer
Capacity : 2.6 Ah
Voltage : 14.8 VDC
Maximum Continuous Discharge : 3 C (7.8 A)
Maximum Burst Discharge : 5 C (13 A)
Maximum Charge Voltage : 4.2 V per cell
Minimum Discharge Voltage : 3.0 V
Dimensions : 10.0 x 2.5 x 3.0 cm (3.9 x 1 x 1.2 in)
Weight : 200g (7.1 oz)

Payload - Maximum : 6.8 kg (15 lb)
Power Requirements : 9 to 18 VDC (3S or 4S LiPo)
Dimensions :
Camera Cage - 20.3 x 20.3 x 19.7 cm (7.99 x 7.99 x 7.76 in)
Storage - Varies, depending on how system is broken down
Weight : 2.47 kg (5.4 lb)

In the Box

2 x LiPo Battery
LiPo Battery Charger with Leads
Dock for C-Stand
Top Handle
M2.5 Hex Driver
M3 Hex Driver