Datavideo NVW-200 Dual Radio High Power WiFi Bridging Unit

Datavideo NVW-200 Dual Radio High Power WiFi Bridging Unit
Cut camera cables and send HD video over massive distances (in conjunction with Teradek Cube).
Control studio cameras remotely without the need for Ethernet cabling.
Place PTZ cameras in any location, benefiting from NVW-200 battery power supply.


Distribute video wirelessly over great distances, ideal for roaming cameras or point to point links
Connect any network (IP) enabled devices over a high throughput long range WiFi link
Easily extend the range of existing WiFi equipment with just one unit
Completely transparent, devices connected to either end of the WiFi link will behave exactly as they would if they were connected directly with an Ethernet cable
Dual radio design allows one radio to be used for the backhaul between bridging units and the other for as a local access point.
Ideal for covering larger distances, directional antennas can be used to connect bridging units while the local access point still allows free Omni-directional roaming at each end.
Multiple units can be used together (Point to MultiPoint)
Supports transmission speeds up to 300Mb/s
Supports transmission distances greater than 500M with standard antennae / up to 10KM with external antennae
Automatically adjusts transmission rates based on current conditions to maintain link stability
Housed in a ruggedized carry case
Can be powered from standard v-mount batteries or POE
XLR power output for powering external devices
No radio licences required
Supports the use of narrow channel widths for increased range and stability in crowded environments
Web based site interference monitor


Connections : 1x RJ45 (for 10/100 Base T for LAN (POE))

Standards :
IEEE 802.11a
IEEE 802.11n
802.11 b/g

Data Rate : Up to 300Mb/s at > 500 Meters

Antenna : 3x External Antennas

Encryption :
64bit WEP
128bit WEP

Modulation Scheme : OFDM

DFS (Dynamic Frequency Selection)
WDS (Layer 2 Bridge)
Enhanced Sensitivity: -96dBm
Multi-Country Roaming Supported
2x2 MIMO

Connection Types :
Fixed IP

Power :
DC: 5~20V
Passive POE : 24~48V
802.3af POE : 48-56V

In the Box

Rugged carry case