Libec RS-250RM Tripod

by Libec
Libec RS-250RM Tripod
Aluminum Tripod
Pan and Tilt Fluid Head
Mid-Level Spreader Included
Sliding Plate Included
Super Torque System
Load Capacity of 13 lb
Maximum Height of 5.4'
Outstanding Rigidity
Tripod Case Included


Ideal Counterbalance
Complete counterbalance make it possible to stop the camera
precisely at any tilt angle.
*When the innerspring is set to maximum strength,
the tilt angle is limited to +/-40 degrees.

New Drag System
The new mechanism of the drag system makes for a quantum leap in operability when panning or tilting. There is also a significant reduction in the wobbling of the image that occurs with panning at the start of shooting, as well as in the backlash that occurs at the end of panning. Enjoy stress-free camerawork for the first time.

Low temperature capabilities
Use this unit in temperatures as low as -40 degrees C / -40 degrees F. Ordinary torque performance is demonstrated even in frigid climates.

Outstanding rigidity
The newly designed tripod eliminates wobbling of the image caused by tripod twisting.


Load Capacity : 6 kg (13 lb)
Maximum Height : 1.65 m (5.4')
Maximum Height w/o Column Extended : N/A
Minimum Height : 80 cm (31.5")
Folded Length : Not specified by manufacturer
Leveling Bubble/Illuminated : Yes
Weight : 6 kg (13.2 lb )

Counter Balance System : Continuous
Counter Balance Range : 1.8 to 5 kg (4 to 11 lb)
Quick Release/Wedge Plate : Yes
Balance Plate : Not specified by manufacturer
Tilt Drag : 2-step
Tilt Range : +90/-70o
Pan Range : 360o

Material : Aluminum
Head Attachment Fitting : 75 mm ball, plate with 1/4" screw with video pin
Leg Stages/Sections : 2-stage
Leg Lock Type : Not specified by manufacturer
Independent Leg Spread : No
Spiked/Retractable Feet : No, rubber
Center Brace : Mid-Level Spreader

In the Box

Pan and Tilt Fluid Head
Mid-Level Spreader
Tripod Case


Compatible Products