Cardioid Condenser Element
The 16mm low-mass diaphragm features a cardioid polar pattern. The cardioid pattern effectively minimizes ambient room noise, noise from adjacent instruments or vocalists and minimizes feed-back caused by monitors.

Wide Frequency Response
The wide frequency response of 20Hz to 20kHz allows accurate signal reproduction from any source.

Wide Dynamic Range & Transient Response
The AT2020 boasts a wide dynamic range of 124dB (typical). The capsule reproduces loud signals and transients with minimal noise and peak distortion.

Transducer : Fixed-charge back plate permanently polarized condenser
Polar Pattern : Cardioid
Frequency Response : 20Hz - 20kHz
Open Circuit Sensitivity : -37 dB (14.1 mV) re 1V @ 1 Pa
Impedance : 100 Ohm
Noise : 20 dB SPL
Dynamic Range (Typical) : 124dB, 1 kHz @ Max SPL
Signal-to-Noise Ratio : 74dB, 1kHz @ 1 Pa
Maximum Input Sound Level : 144dB SPL, 1kHz @ Max SPL
Power Requirements : 48V DC, 2 mA typical
Output Impedance : 100 ohms
Output Connectors : 3-pin XLR male
Pad : No
Low Frequency Roll-Off : No
Dimensions : 162 x 52mm (6.38 x 2.05 in) (Length x Diameter)
Weight : 345 g (12.1 oz)

Pivoting Stand Mount 5/8" - 27 threaded
Soft Protective Pouch