Anton Bauer Tandem-70 Gold Mount Charger

Anton Bauer Tandem-70 Gold Mount Charger
Single-Position Charger
AC Adapter


Battery Charger
As with all Anton Bauer chargers, charging with the Tandem-70 is fully automatic. Mount any Logic Series battery to the Tandem-70 and it will automatically determine the appropriate charge routine and execute it.
The Tandem-70 will charge any Anton Bauer Logic Series Gold Mount battery including:
ProPac 14
Digital ProPac 14
TrimPac 14
Digital Trimpac
Hytron 50/100/140
Dionic 90/160

The Tandem-70 incorporates the exclusive InterActive communication between the battery and charger, which allows the charger to identify any Anton Bauer battery attached and determine the precise charge routine for that particular battery under its present condition.

Three Stage Charging
In general, the Tandem-70 utilizes a Three-Stage Charge Routine for each battery.

DC Power Supply
The Tandem-70 will automatically operate as an AC adapter once the camera or other device is switched on. An On/Off switch is not incorporated into the power supply (a green LED will light, indicating that the unit is operating as a power supply).

Automatic Source Selection
If the AC line voltage is removed, and a charged battery is mounted on the Tandem-70, power from the battery will be routed to the camera. When the AC line voltage is restored, the battery is reevaluated for a proper charge routine.


Power Supply : Yes
Battery Bays : 1
Type of Charging : Single Battery
Diagnostics : None
Connections/Interface :
Gold Mount Type Female (x 1)
Gold Mount Type Male (x 1)
Power Requirements : 90-250VAC, 50 or 60Hz
Dimensions (WxHxD) : 132 x 103 x 56mm (5.25 x 4 x 2.13 in)
Weight : 450g (1 lb)

In the Box

AC Cord