Pintek DP-25 Differential Probe 25MHz 1000V (pack 10 pcs)

by Pintek
In Stock $1430.00
Pintek DP-25 Differential Probe 25MHz 1000V (pack 10 pcs)
Pack 10 pcs
3 range attenuator
2 power sources
1000V input Cat III
Low battery auto off
Separable design, convenient and durable
Supports CE, IEC 1010, EN 61010, UL 3111

Specifications

Band width (-3dB, 50 Omh load): DC-25MHz . ( x 20: DC~15MHz)
Accuracy : +/- 2% at 20-30oC 70% RH after 20 minutes warm up.
Attenuation : x 20, x 50, x 200 ( Into 1M Ohm scope ) ; x 40, x 10, x 400 ( Into 50 Ohm load )
Maximum operation Voltage ( DC + peak AC ) :
<= +/- 140V at x 20
<= +/- 350V at x 50
<= +/- 1300V at x 200
Maximum input Differential Voltage : 1300V ( DC + peak AC ) or 1000V RMS
Maximum input Voltage to Ground : 1000V ( DC + peak AC ) or 600V RMS
Common Mode Rejection Ratio ( CMRR ):
60Hz : >10,000 : 1
100Hz: >1,000 : 1
1MHz: > 300 : 1
Noise :<= 2 mV rms ( Into 50 Omh load )
Input Impedance :
2M Omh, 2.3 PF between inputs and ground.
4M Omh, 1.2 PF between inputs.
Power :One internal 9V alkaline battery or external 6V-9V DC.

WARNING

1. Do not use DP-25 above 1000v ( DC + peak AC ) between ground and the input or 1,300V ( DC + peak AC ) between the input lead.
2. Do not operate DP-25 in wet or damp condition.
3. Do not operate DP-25 in an explosive atmosphere.
4. Do not immerse DP-25 in liquids.
5. Do not operated DP-25 without covers.
6. Please change the battery when the "LOW BATT " LED is lighted. At this time DP-25 can operate but not guaranteed the accuracy.
7. DP-25 can not operate if both POWER and LOW BATT LED are not light.

Downloads

In the Box

Pintek BP-256N IC Clip (set 2 pcs)
Pintek BP-356N Banana to Banana Cable (set 2 pcs)
Pintek BP-250 BNC to BNC Cable
Power Adaptor
Operation Manual

Reviews

Compatible Products