Azden WHX-PRO On-Camera VHF Wireless System

by Azden
Azden WHX-PRO On-Camera VHF Wireless System
A complete system which includes the WM/T-PRO self-contained hand-held microphone/transmitter and the WR-PRO receiver which comes with both a shoe-mount and hook-and-loop mounting tape. Standby switch on the microphone allows you to pass it around without "touch" noise. All receivers and transmitters in the "PRO" Series are on the same 2 frequencies (169.445MHz and 170.245MHz) and use the same circuitry, making them interchangeable, and allowing you to add to your system at any time.


Receiver type: Double superheterodyne
Sensitivity: 2mV @ S/N of 40dB
Battery: 1-9V Alkaline
Power consumption: 25mA
Monitor out: 1V, Mod. freq.: 1kHz, Deviation: +/-7kHz
Mic out: 8mV w/10k Ohm, Mod. freq.: 1kHz, Deviation: +/-7kHz
Mic out impedance: 300W
Dimen.: 86(h) x 60(w) x 21.5(d) mm
Weight w/battery: 128g

Antenna: Internal Antenna
Mic Unit: Uni Dynamic
RF Output: 10mW
Impedance: 8 k ohms
Battery: 1 (AA)
Battery Life: 8 to 10 Hours
Dimensions: 62mm ( D) x 211 mm
Weight: 170g with Battery

In the Box

Shoe Mount
Touch Fastener
Ear Monitor
Audio Cable (to Connect Receiver to Camera)