Osee AMS-160-D2 Audio Monitor System

by Osee
DISCONTINUED
Osee AMS-160-D2 Audio Monitor System
The AMS-160 (Audio Monitoring System) is a broadcast quality audio monitoring device
for embedded and analog audio. The compact size (1RU) and the loaded feature set have made the AMS-160 an indispensable tool for monitoring a wide assortment of embedded audio/analog audio signals in the broadcast, remote and post-production environments. The AMS-160 accepts both embedded and dual mono/stereo audio. A user selectable switch allows the operator to easily rotate through all the input sources. Four LEDs will indicate which input source is selected.
The output speakers allow the input source to be monitored more effectively, a headphonejack is provided on the front panel, usage automatically mutes the speakers. Both balance and volume controls are user definable. The audio output may also be muted.

Features

The AMS-160 features two 26-segment LED level meters showing simultaneous VU & PPMfor accurate level-metering. Extensive magnetic shielding allows placement immediately adjacent to video monitors with no color impurities.

1RU rack unit high
2 SDI inputs (selectable group & sub-group)
2 balanced analog inputs (1 stereo)
2 reclocked SDI outputs;
User selectable input sources
1 composite analog video output
Two 26-segment tri-color level meters displaying simulatneous VU & PPM
2 speakers
Headphone jack, muted speakers
Volume and balance control
Quick and simple installation

Specifications

Serial Digital Video Input (only for AMS160-D2 or AMS160-DA2)
Quantity 2
Standards 259M-C 270 Mb/s; 525/625 auto sensing
Connector BNC per IEC 169-8
Impedance 75 ohms
Return Loss >18 dB to 270MHz
Signal Level 800mV +/-10%
Equalization Auto EQ to 300m

Serial Digital Video Output (only for AMS160-D2 or AMS160-DA2)
Quantity 2
Standards 259M-C 270 Mb/s; auto sensing
Connector BNC per IEC
Impedance 75 ohms
Return Loss >18 dB to 270MHz
Signal Level 800mV +/-10%
DC Level 0.0 V +/-0.5 V
Overshoot < 10% of amplitude (all outputs terminated)
Rise and Fall Time 0.4 to 0.8ns(20% to 80% of amplitude)
Jitter <500ps

Composite Analog Video Output (only for AMS160-D2 or AMS160-DA2)
Quantity 1
Standards NTSC, PAL-B
Impedance 75 ohms
Return Loss >40 dB to 5.75MHz
Quantizing 8 bits
Frequency Response +/-0.25dB to 5MHz
Differential Gain <1.5%
Differential Phase <1.2o
DC Offset +/-50mV
Chroma/
Luma Delay <10ns to 5MHz
Chroma/
Luma Gain +/-1.5%
Transient Response <0.5% K Factor
Signal to Noise >54dB RMS to 5MHz

Analog Audio Input
Quantity 2
Sampling Rate 48KHz
Connector 3-pin connector
Input Operating Level +24,+20,+18,+12dBu
Impedance >36 Kohms
A/D Resolution 24-bit

Level Meters
Quantity 2
Display 26-segment
Scale 0 to -48dBFS(AES), +12dB to -50dB(VU)
Dynamics VU & PPM simultaneously
Level Meter Threshold 0 VU to -12/-18/-20/-24dBFS, DIP Switch Selectable
Midscale Resolution 2dB

Speaker Output
Quantity 1
Connector Stereo headphone jack
Power 150mW per channel in 32-ohm speakers shut-off on connection

Control
ALC/Manual Switch Yes, with display
ALC Gain Manual Gain -96dB to +12dB, 0.5dB step, with display
Gain Source Yes, Ch1/Ch2/Ch3 & Ch2

General Specifications
Magnetic Shielding <1 gauss any adjacent surface
Chassis Type 1RU, 19" rack mounting
Power Consumption <30W
Power Supply 100-240 VAC, 50/60Hz
Dimmensions
(HxWxD) 44.5x483x260m

Reviews