Takstar SM-1C Condenser Microphone

by Takstar
Takstar SM-1C Condenser Microphone
TAKSTAR recording condenser microphone series
-multiple polar pattern(Uni/Bi/Omni)
-gold-plate diaphragm capsule---to assure low self-noise, high output and the accurate reproduction of even the subtlest sounds, especially high frequency signals not easily reproduced by conventional large diaphragm condenser transducers
-switchable 10dB built-in(nominal)pad and low frequency attenuation----to enable easy handling of very high sound pressure levels and the successful reduction of the pickup of low frequency ambient noise (especially common while on-stage performing)
-undistorted reproduction of high sound pressure level signals at all frequencies
-integrated three stage mesh grille---to protect the microphone from accidental damage and reduce plosives and breath noise
-standard XLR-3P(F) connector---to match all kinds of audio equipment
TV studios, recording studios, broadcasting stations, stage performances, percussion and guitar recording


Transducer Principle: Pressure Gradient Combination
Polar Pattern: Uni/Bi/Omni
Frequency Response: 20Hz-20kHz
Sensitivity: -33dB/-36dB/-38dB+/-2dB(0dB=1V/Pa at 1kHz)
Output Impedance: 200 Ohm+/-30% (at 1kHz)
Load Impedance: >=1000 Ohm
Self Noise: 14/15/16dB A
Max. Input SPL: 130dB (at 1kHz <=1% T.H.D)
140dB (with 10dB pad)
S/N Ratio: 80/79/78dB
Phantom Power Requirement: 48V Phantom Power


Net Weight: 590g
Body Dimensions: D54x201mm