Canon ST-E2 Speedlite Transmitter

by Canon
Canon ST-E2 Speedlite Transmitter
The Canon Speedlite Transmitter ST-E2 is a dedicated E-TTL (II) wireless autoflash transmitter that can control an unlimited number of 420EX, 430EX, 550EX and 580EX flashes, in two separate groups; A and B.

The ST-E2 sets and controls all functions of its slave units. The flash output ratio between groups A and B can also be adjusted from 8:1 to 1:1 or from 1:1 to 1:8.

Under low-light or low-contrast conditions it emits an AF-assist beam linked to the EOS-3's 45 focusing points.

Note: 420EX/430EX can not be used as the master slave to trigger other flashes.


Compatible with 420EX, 430EX, 550EX, and 580EX flashes
Compatible Cameras: Type A EOS cameras (E- TTL, autoflash); type B EOS cameras (Manual flash)
Flash Ratio Control: For A:B ratio: 1:8 to 8:1, in half- step increments or 13 steps
High- Speed Sync (FP flash): Enabled with high-speed sync mode
Slave Operation Confirmation: With test transmission button. Slave A fires followed by slave B at 1/64 output
AF-assist Beam: Compatible with EOS-3's 45-point Area AF and 28mm and longer lens focal lengths
SE Feature: While the power switch is set to I or HOLD, the transmission turns off automatically after about 90 sec. of non-use


Transmission System - Infrared pulse
Transmission Range - Indoors: Approx. 39.4 - 49.2' (12-15 m) -- Outdoors: Approx. 26.2-32.8' (8-10 m)
Transmission Coverage - +/-40 degrees horizontal and +/-30 degrees vertical Power Source - 2CR5 lithium (6V) battery
Dimensions - 2.4 x 2 x 31" (62 x 51 x 80mm) WxHxD


Compatible Products