Pintek DP-100 Differential Probe 100MHz 6500V

by Pintek
In Stock $360.00
Pintek DP-100 Differential Probe 100MHz 6500V
4 Range Attenuator
100MHz Bandwidth
2 Power Sources
6500V High Voltage Input
<6.5V Low Battery Indicator
<5.5V Auto Power Off
Separable Design, Convenient, Durable
MEET IEC1010, UL3111, TUV GS, CAT III 6500V

Specifications

Differential Voltage DC + pk AC : 6500V
Bandwidth ( 50 Ohm load -3dB ) : 100MHz ( x100 50MHz)
Common Mode Voltage DC + pk AC : 6500V
Common Mode Voltage RMS CAT II : 6500V
Common Mode Voltage RMS CAT III : 6500V
Attenuation ( Switchable ) : X 100, X 200, X 500, X 1000
Input R ( Each input ) : 27M Ohm +/- 1%
Input C ( Each input ) : 2.5 PF +/- 2%
Maximum Operation Voltage ( DC + pk AC ) -
~ +/- 650V at X 100
~ +/- 1300V at X 200
~ +/- 3250V at X 500
~ +/- 6500V at X 1000
Common Mode Rejection Ration -
( C M R R )
60 Hz : > 20,000 : 1
100 Hz : > 2,000 : 1
1 MHz : > 600 : 1
Noise ( Into 50 Ohm load ) : ~ 1 m Vrms
Input Impedance ( between input) : 54 M Ohm // 1.25 PF
Accuracy ( at 20 ~ 30oC 70% RH after 20 minutes ) : ~ +/- 1.5 %
Maximum Output Voltage : ~ +/- 6.5 V

Power source:
1. 9V battery
2. External 6V ~ 9V DC

WARNING

1. Do not use DP-50/100 above 6500V ( DC + peak AC ) between ground and the input or 6500V ( DC + peak AC ) between the input lead.
2. Do not operate DP-50/100 in wet or damp condition.
3. Do not operate DP-50/100 in an explosive atmosphere
4. Do not immerse DP-50/100 in liquids.
5. Do not operate DP-50/100 without covers.
6. Please change the battery when the " LOW BATT" LED is lighted. At this time DP-5/100 can operate but not guaranteed the accuracy.

Downloads

In the Box

Pintek BP-250 BNC to BNC Cable
Pintek BP-276N Alligator Clip (set 2 pcs)
Pintek BP-266 High Voltage IC Clip (set 2 pcs)
Pintek BP-366 Banana to Banana High Voltage Cable (set 2 pcs)
Pintek BP-286 Test Leader (set 2 pcs)
Adaptor
Operation Manual

Reviews

Compatible Products