Pintek FG-30 Function Generator

by Pintek
In Stock $138.00
Pintek FG-30 Function Generator
6 FUNCTION, 6 RANGE
0.5Hz~3MHz
LINEAR /LOG SWEEP
20Vp-p OUT

Specifications

1. GENERAL SPECIFICATIONS
Frequency : 0.5Hz ~ 3MHz in 6 steps, controlled by rotary switch.
Output Waveform : Sine, Square, Triangle, Ramp, Positive Pulse and Negative Pulse; 6 waveforms total.
Stability :
0.1% - 15minutes after power-on.
0.2% - 24hrs after power-on.
DC Offset : Continuous Adjustment, ?10V at no-load or ?5V at 50 load.
Limits of Operation : 0oC~40oC,10~80%R.H.
Storage Environment : -20oC~70oC,0~90%R.H.
Power source :
AC 115V (+/-10%)50/60HZ,FUSE:600mA
AC 230V (+/-10%)50/60HZ,FUSE:300mA
Power Consumption : 25W
Dimensions : 27.5 x 9.0 x.30.0 cm
Weight : 2.5Kg Net.

2. RAMP WAVE
Frequency : 0.5Hz - 2.5MHz
Symmetry : 80% (rise wave) to 20% (fall wave), < 5%, 1Hz ~ 100KHz.
Rise Wave Linearity : < 2%, 1Hz - 100KHz.

3. TRIANGLE WAVE
Frequency : 0.5Hz - 3MHz.
Symmetry : 50% (rise wave) to 50% (fall wave), < 2%, 1Hz ~ 100KHz.
Linearity : < 1%, 1Hz ~ 100KHz.

4. SINE WAVE
Frequency : 0.5Hz ~ 3MHz.
Distortion : < 2%, 1Hz ~ 100KHz.
Harmonic Ratio : < 30dB, 100KHz ~ 3MHz.
Frequency Response :
< 0.1dB up to 100KHz.
< 1dB 100KHz to 3MHz.

5. SQUARE WAVE
Frequency : 0.5Hz ~ 3MHz.
Symmetry : 50% (positive half) to 50% (negative half), < 2%, 1Hz ~ 100KHz.
Rise Time : < 60ns.

6. POSITIVE PULSE
Frequency : 0.5Hz ~ 2.5MHz.
Width : 0.4sec ~ 100ns continuous adjustment.
Symmetry : 20% to 80%, < 5%, 1Hz ~ 100KHz.
Rise Time : < 60ns.

7. NEGATIVE PULSE
Frequency : 0.5Hz ~ 2.5MHz.
Width : 0.4sec ~ 100ns.
Symmetry : 80% to 20%, < 5%, 1Hz ~ 100KHz.
Fall Time : < 60ns.

8. MAIN OUTPUT
Output Impedance : 50 Omh, < 2% Accuracy.
Max. output :
20 Vp-p (No load), +/-1V
10 Vp-p (50 Omh load),+/-0.5V
Min. output : 0.1Vp-p (No load) and 0.05V (50 Omh load)
Attenuator : one -20dB switch, < 2% Accuracy.

9. SYNCHRONOUS OUTPUT
Output Impedance : 50 Omh, < 2% Accuracy.
Output Level : TTL level, > 3Vp-p fixed amplitude.
Fanout : > 20.
Rise Time : < 30ns.

10. VCF INPUT
Input Impedance : 0 ~ 10V.
Input Frequency : DC ~ 1KHz.
Input Frequency Variance : 1:1 to 1:1000.

11. SWEEP SYNCHRONOUS OUTPUT
Output Impedance : 1KHz, < 20%.
Output Waveform : Linear or Log Sweep Ramp Wave.
Output Amplitude : 10Vp-p (No load) or 5Vp-p (1K Ohm load)
Output Frequency : Continuous adjustment, 0.2Hz ~ 100Hz.

12. SWEEP GENERATOR
Sweep Form : Linear or Log switchable.
Sweep Speed : 5sec ~ 10ms, continuous adjustment.
Sweep Width : 1:1 ~ 1:100

Downloads

In the Box

Pintek BP-251 BNC to Alligator Cable
Power cord
Operation manual

Reviews