Globalmediapro eShop
United States | Delivery: 2-3 days by UPS | Payment: bank transfer to Citizens Bank (United States)
797 Audio NT2S Condenser Microphone
Rate:
0 ratings
Log in to rate
Already own it? Write a review
he NT2S condenser microphone is a large diaphragm microphone with three
polar patterns.With improved capsule structure,its sound has a very transparent
characteristic.Plus a higher maximum sound presser level,this microphone is
used for many diverse applications in professional recording studios and
semiprofessional productions.
polar patterns.With improved capsule structure,its sound has a very transparent
characteristic.Plus a higher maximum sound presser level,this microphone is
used for many diverse applications in professional recording studios and
semiprofessional productions.
Features
Pressure-gradient transducer with large double membrane capsule
Three directional characterstics:omin,cardioid,figure-8
Class A amplifier transformerless circuitry
High output level
Switchable low frequency roll-off filter and 10 dB pre-attenuation
Three directional characterstics:omin,cardioid,figure-8
Class A amplifier transformerless circuitry
High output level
Switchable low frequency roll-off filter and 10 dB pre-attenuation
Specifications
Acoustical operating principle : pressure gradient transducer
Directional pattern : Omin,Cardioid,figure-8
Frequency rang : 20 ~ 20 kHz
Sensitivity at 1KHz into 1Kohm : 25mV/Pa ( -32dBV , re. 0dB=1V/Pa)
Rated Impedance : 200 Ohm
Recommended load impedance : 1000 Ohm
MAX. SPL for 1% THD @1000Hz : 135 dB
Equivalent SPL DIN/IEC 651 : 18 dB-A
S/N ratio DIN/IEC 651 : 76 dB-A
Supply voltage : 48 V phantom power
Matching connector : 3-pin XLR (gold plated)
Diameter : 50 mm
Length : 205 mm
Weight : 540 g
Directional pattern : Omin,Cardioid,figure-8
Frequency rang : 20 ~ 20 kHz
Sensitivity at 1KHz into 1Kohm : 25mV/Pa ( -32dBV , re. 0dB=1V/Pa)
Rated Impedance : 200 Ohm
Recommended load impedance : 1000 Ohm
MAX. SPL for 1% THD @1000Hz : 135 dB
Equivalent SPL DIN/IEC 651 : 18 dB-A
S/N ratio DIN/IEC 651 : 76 dB-A
Supply voltage : 48 V phantom power
Matching connector : 3-pin XLR (gold plated)
Diameter : 50 mm
Length : 205 mm
Weight : 540 g
|
|
|