Rate:

0 ratings

Log in to rate

Designed to work with numerous sound sources to maximum effect, the CR8288
excels on vocals, grand pianos, guitars and percussion as well. Expansive
frequency response and low self-noise allow itself straight to digital recording
system and thus leaving the pure warm sound unadulterated. For close miking
vocals a pop shield is recommended.

Switchable tube microphone
Pressure gradient transducer
Three polar patterns: cardioid, omni, figure-8
High output level with low noise
Professional Audio Transformer used for the output stage
Screws at the mic bottom designed for using swivel mount
6-pin gold plated XLR connector
Bottle style with elegant black finish

Acoustical operating principle : pressure gradient transducer
Directional pattern : Switchable 3 polar patterns (cardioid/omni/figure-8)
Frequency rang : 20 ~ 20 kHz
Sensitivity at 1KHz into 1Kohm : 13mV/Pa ( -38dBV , re. 0dB=1V/Pa)
Rated Impedance : 260 Ohm
Recommended load impedance : >1000 Ohm
MAX. SPL for 1% THD @1000Hz : 125 dB
Equivalent SPL DIN/IEC 651 : 15dB-A
S/N ratio DIN/IEC 651 : 79dB-A
Supply voltage : Special phantom power DJ-12
Matching connector : 6-pin XLR (gold plated)
Diameter : 56 mm
Length : 157 mm
Weight : 360 g